FEATURES & BENEFITS
- Adjustable pressure switch from 17-80psi for OEM when needed. - Quite operation. Motor sounds not louder than your room fan running. - Hose connections with multiple fittings allow connection to any outlet. |
- Rubber feet for noise reduction for vibration. - Compact design and heavy-duty demand switch. - Can run dry. |
TYPICAL APPLICATIONS
Marine, RV, Agricultural Spraying, General Industrial, Fitration, Beverage Processing, Solar Water System, etc.Coca cola machine, juice machine, coffee machine, beverage machine, water dispenser machine, pure water machine etc.
PUMP | |
Type |
2 Chamber positive displacement diaphragm pump, self priming, capable of being run dry |
Control Type | Pressure switch & Bypass |
Max Recommended Temperature | 60° C (140° F) |
Priming Capabilities | 4 feet (1.2 m) suction lift |
Re-start Pressure |
Shut-off Pressure 35 PSI: 25 PSI ±5 PSI (±0.3 bar) Shut-off Pressure 40 PSI: 30 PSI ±5 PSI (±0.3 bar) Shut-offPressure 70 PSI: 56 PSI ±5 PSI (±0.3 bar) |
Inlet/Outlet Ports | O-ring inlet & outlet |
Weight | 1.3 lbs (0.6 kg) |
MOTOR | |
Leads | 18 AWG, 14" (35 cm) long with 2-Pin connector / Leads |
Duty Cycle | Intermittent |
Max.Amp Draw | 4.5 A |
Fuse | 6.8 A |
Model | Voltage |
Open Flow |
Control Type |
Max Draw |
Shut-off Pressure |
Valves | Diaphragm | Ports |
Wire Connections |
SFDP1-008-040-21A | 12V | 0.8 / 3.0 | Switch | 3.5A | 40 / 2.8 | EPDM | Santoprene | O-ring | 2-Pin/Leads |
SFDP2-008-040-21A | 24V | 0.8 / 3.0 | Switch | 2.0A | 40 / 2.8 | EPDM | Santoprene | O-ring | 2-Pin/Leads |
OEM/ODM service: Pressure from 17 psi to 80 psi, open flow from 2.0 lpm to 4.3 lpm. Material can adjust according to your requirement.
SHIPPING INFORMATION
Unit Pump Weight |
1.35 lbs(0.61 kg) |
Selling Unit Size (L x W x H) |
7.20" x 4.17" x 2.60" |
Selling Unit Weight |
1.51 lbs(0.69 kg) |
Master Carton Size (L x W x H) |
15.43" x 13.19" x 13.58" |
Master Carton Qty |
30 pcs |
Master Carton Weight |
45.82 lbs (20.78 kg) |
CAUTION
Please make sure correct wiring, otherwise it will damage the pump (The red cable should be connected with the positive pole, and the black cable should be connected to the negative pole).
Email Ask: