A fully assembled pressure set that simplifies the installation of water pressure systems for both the professional and amateur installer. The set consists of a?3 chamber diaphragm pump, strainer and pre-pressurized accumulator tank with quick connect electrical connections on a?Plate mounted board. Serves 3 or more 1/2" (13mm) outlets.
Contact Us
FEATURES & BENEFITS
- Powerful 3.0 gallons/11.3 litres per minute of flow.
-?Ultra quiet with constant and steady flow.
-?Superior self-priming capabilities.
-?Powerful enough to supply up to 3 fixtures. -?Built-in adjustable pressure switch. |
|
-?Easy pre-assembled installation.
-?Heavy-duty, corrosion resistant motor.
-?Capable of being run dry without damage. -?Can be fitted to new or existing systems. -?Can be fitted to new or existing systems. |
TYPICAL APPLICATIONS
Marine, RV, Filtration
PUMP | |
Type | 3 Chamber positive displacement diaphragm pump, self priming, capable of being run dry |
Control Type | Pressure switch |
Max Recommended Temperature | 60° C(140° F) |
Priming Capabilities | 6 feet (1.8 m) suction lift |
Re-start Pressure |
45 PSI:35 ± 5 PSI (± 0.3 bar) |
Inlet/Outlet Ports | 1/2" MNPT |
Weight | 11.9 lbs (5.4 kg) |
MOTOR | |
Leads | 16 AWG, 13" (33 cm) long with 2-Pin connector/Leads |
Duty Cycle | Interrnittet |
Max.Amp Draw | 8.0 A |
Fuse | 12.0 A |
STANDARD PUMP CONFIGURATIONS
Model | Tank Volume | Voltage |
Control Type |
Open Flow (GPM/LPM) |
Pressure On |
Pressure Off |
Max Draw |
Ports |
Wire Connections |
SFWSK1-030-045-002 | 0.75L | 12V | Switch | 3.0 / 11.3 | 35 / 2.4 | 45 / 3.1 | 11.0A | 1/2" MNPT | 2-Pin/Leads |
SFWSK2-030-045-002 | 0.75L | 24V | Switch | 3.0 / 11.3 | 35 / 2.4 | 45 / 3.1 | 5.5A | 1/2" MNPT | 2-Pin/Leads |
PERFORMANCE
DIMENSIONS
PRODUCT DETAILS
DETAILED COMPOSITION
Key | Description | Quantity |
1 |
Base |
1 |
2 |
Screw for Accumulator Tank |
2 |
3 |
0.75L Accumulator Tank |
1 |
4 |
51F09 Fitting |
1 |
5 |
Screw for Pump |
4 |
6 |
33 Series Diaphragm Pump |
1 |
7 |
Sealed Copper Terminal |
1 |
8 |
Button Bushings |
2 |
9 |
Rubber Feet |
4 |
10 |
Flat Gasket |
12 |
11 | Screw Nut | 6 |
APPLICATION
SHIPPING INFORMATION
|
|
Unit Pump Weight |
5.95 lbs(2.70 kg) |
Selling Unit Size (L x W x H) |
14.96"x 10.55 "x 6.10"
(38.0 x 26.8 x 15.5 cm) |
Selling Unit Weight |
7.05 lbs(3.20 kg) |
Master Carton Size (L x W x H) |
22.05"x 15.63 "x 13.58" |
Master Carton Qty |
4 pcs |
Master Carton Weight |
23.81 lbs (10.8 kg) |
CAUTIONS
Explosion hazard. Do not pump gasoline, solvents, thinners or other flammable liquids. To do so can cause an explosion resulting in injury or death.
Motor case will get hot. Prolonged contact during operation may cause a burn.
Do not overpressurise tank. Pre-charge of the tank is 32PSI. If adjustments are needed, please keep the pressure range between 30PSI~34PSI.
Email Ask: